After I stripped it of the fabric, I was surprised to find caning in the back of the chair. It was obvious to me that the wood used for the back of the chair was Quarter-Sawn (or Tiger Eye) Oak, which was popular back in the Victorian Era. When I took the fabric off, I also noticed a sticker that reads “Murphy Chair Company – Detroit, Michigan.” I googled it and found that it was a company in Detroit around 1900 so that puts a date on it - woah! Anyhow, after looking at several chairs like this, I imagine it had a needlepoint seat covering. I was giving this to our daughter, though, and I already had fabric to go with her decorating taste, so I used that.
We also inherited 3 rocking chairs. One of them was covered with orange fabric, which is great for Autumn when we inherited it, but didn’t go with any body’s home decor.
I have always wanted to reupholster a chair, so I got the opportunity to do just that with this chair. Here’s what it looks like now. I don’t normally like to paint over wood unless it is butt ugly. This wood did nothing for the chair, so I painted it black and then distressed it to expose parts of the wood.
Keeping the tradition of showing the back of a quilt, here is the back of the chair.
This, too, is going to my daughter’s house. We already had 1 rocking chair inside and 2 on the porch, so now with the other 2 rocking chairs that we inherited, we have 5 rocking chairs. We do not need this to make it 6.
I found that I really liked re-covering these chairs and can imagine them with lots of colorful fabrics and even covered with patchwork blocks – I can see myself reupholstering more chairs in my future.
I have a list of goals for 2014, but I find that my ADD interferes a lot and my mind is constantly dreaming up something new that needs to get done right now! That’s how this next project happened. I knew I was going to get a customer quilt on Friday, so I cleaned my Quilting Studio on Tuesday. Cleaning my studio led to me taking everything off my wooden counter for a good wipe-down. When I originally built this counter (as a workplace and cutting counter), I had planned on covering it with laminate or staining the wood or doing something to cover the wood. Cleaning it reminded me that I’d never gotten around to “finishing” that project. You can see a “before” picture in a post I wrote on my quilting blog here. I pulled some fabric out of my stash (a bolt that had never been opened!) that looked like rocks. Imagine my surprise when I opened up the bolt of fabric and laid it out on the counter top. I smiled and thought this was kismet. Rays of light shown down from the heavens and the angels sang… and my smile “sang” too!
Doesn’t it look like granite? First, I laid the fabric down on the counter top. Then I Mod-Podged a section at a time, Mod Podging the wood underneath the fabric and then making sure that was stuck down with no bubbles in between, I Mod Podged on top of the fabric. Mod Podge is supposed to act as a glue and a sealer. I then went around the edges and cut off the excess fabric with an Exacto knife. This shot was taken while it was fresh on the counter top and still wet, so that’s why you see streaks or cloudiness in areas. The Mod Podge dries clear. Here’s a close-up.
I have more
